Free, no-obligation estimate
One-day polyaspartic installs available
Knoxville local, not a national chain
Diamond grinding on every job
How it works

How does it work? Three steps, no runaround.

1

Tell us about the slab

Call about your floor. You get a free, no-obligation estimate on the call; the crew confirms the exact number on-site before any work starts.

2

The crew grinds and coats

Diamond grind, crack repair, moisture check, then the coating system you picked. Most garages are done in a day or two.

3

You approve the work

Foot traffic in as little as 4 to 6 hours, vehicles after about 24 hours. The crew walks the finished floor with you before calling it done.

Size it up yourself

What will it cost? See what sets your price.

The cost of your garage floor coating depends on size, slab condition, and the finish you choose. Pick your garage size and configuration below to see what affects the price. Basements and commercial slabs are priced individually, and the estimate is always free.

1What space needs epoxy?
What space needs epoxy?
2About how big? (square feet)
sq ft
3Anything extra?
Pick a space above to see a national ballpark.

Ballpark uses the national $4 to $10 per sq ft installed range (where that comes from), not a Knoxville quote. Slab condition and the finish you pick set the final number. Call for a free estimate on your specific project; the crew sets the final number after seeing the slab, before any work starts.

Call for your free estimate
What the crew coats

Which epoxy system fits your slab?

Garage, basement, or commercial floor. Each gets a coating matched to how hard it gets used.

Professional garage floor with metallic epoxy coating

Garage Floor Epoxy in Knoxville

The dusty, stained slab becomes a showroom surface that wipes clean and laughs off hot tires, oil drips, and dropped tools. Flake or metallic, sealed to last.

See garage floors →
Commercial warehouse floor with seamless epoxy coating

Commercial Epoxy in Knoxville

Shops, warehouses, kitchens, and retail floors take a beating. The crew installs seamless, chemical-resistant systems rated for forklifts, foot traffic, and daily wash-downs.

See commercial →
Basement floor with epoxy sealant finishing

Basement Epoxy Floors in Knoxville

A coated basement slab seals out the damp, kills the concrete dust, and turns a storage hole into usable square footage. Moisture gets handled before coating, not after.

See basements →
Decorative epoxy floor with blue and teal flake finish

Metallic & Flake Finishes

Marbled metallic pours, custom flake blends, designer color matches. The decorative work that makes a floor the showpiece of the room. Ask about finish options at your free estimate.

See metallic floors →
Fast-curing polyaspartic floor coating with glossy finish

Polyaspartic Coatings

Need the floor back fast? Polyaspartic systems cure quickly and stand up to UV and abrasion, so a one-day install is on the table when the schedule is tight.

See how installs work →
Knox County Tennessee service area landscape

Which nearby cities are covered?

Out in Farragut, Hardin Valley, Powell, or Fountain City? Calls from across Knox County get the same straight answers.

Get an estimate →
Why local wins

Why hire a Knoxville epoxy crew?

Built for this climate

Humid summers and riverside moisture wreck rushed coatings. A moisture-tolerant primer and proper vapor handling are what let a floor hold up to a real Tennessee year.

Your call gets answered

One call, one local Knoxville provider who gives the estimate and does the work.

The prep is the product

Diamond grinding comes standard on every job. That mechanical bond is the difference between a floor that holds up for years and a kit that peels by August.

Honest about results

If a structural crack or active moisture means more prep, you hear about it before work starts. You hear it straight at the free estimate, not after the work starts.

Warranty terms in writing

Any warranty comes from the local provider and the coating manufacturer, so ask for the terms in writing on the call. Failures caused by slab moisture or the substrate are commonly excluded, which is why the slab gets tested first. Every estimate is free and no-obligation.

What separates a floor that lasts

How does a real epoxy install compare to a DIY kit, and what should you ask any bidder?

Most epoxy floors that peel were never prepped right. Here is what actually separates a floor that lasts from one that fails by August.

What matters The local crew DIY kit Ask any bidder
Surface prep ✓ Diamond grinding on every job Acid etch / scrub only Do you diamond-grind, or acid etch?
Moisture handling ✓ Moisture-tolerant primer, vapor handled ✗ Not addressed Do you take a moisture reading, and what changes if it is high?
Coating grade ✓ Industrial epoxy & polyaspartic Retail floor paint Which system, and what is the dry film thickness?
Who does the work ✓ A local crew, start to finish You, on a weekend Who is on site, and is the warranty in writing?

Service area

From downtown Knoxville and the UT campus out to Cedar Bluff and Turkey Creek, through Farragut, Hardin Valley, Powell, Fountain City, and the rest of Knox County. We also route regularly out to Maryville, Oak Ridge, and Lenoir City. Bigger commercial jobs can go farther out. Just ask. Not sure your address is covered? Call and we will confirm on the spot.

That stained concrete floor is the first thing you see every day.

Oil spots soaked in, hairline cracks, gray dusty concrete that never looks clean no matter how you scrub it. It is the first thing you notice pulling in and the first thing a guest sees when the garage door goes up.

More scrubbing will not fix it. A sealed floor will. The crew grinds the slab, fills the cracks, and lays down a hard epoxy finish that wipes clean and holds up to tires, tools, and dropped wrenches. Tell us what you are working with and call (865) 284-2920 for a free, no-obligation estimate.

Good questions

What do Knoxville homeowners ask most?

Common questions from Knoxville homeowners and shop owners.

How much does epoxy flooring cost in Knoxville?
The cost depends on garage size, slab condition, moisture levels, and your chosen finish. Repairs for cracks or pitting will affect the final cost. Basements and commercial floors are priced individually. Every estimate is free with no obligation.
Does epoxy hold up in Tennessee humidity?
Yes, when it is installed right. The most common cause of peeling is moisture trapped under a coating that was rushed onto an unprepped slab. Checking the slab for moisture vapor and using a moisture-tolerant primer is what lets a coating survive a humid Knoxville summer instead of bubbling after one season.
How long until I can use the floor?
Most floors are ready for foot traffic in as little as 4 to 6 hours, and you can drive your vehicles on it after about 24 hours. Cure time varies depending on the system used and the temperature during installation. You get a clear timeline at the estimate so you can plan where to park.
Why hire a pro instead of a DIY kit?
Two reasons: materials and prep. Professional-grade epoxy is a different product class than the retail floor paint sold as epoxy, and it bonds and wears far better. More important, a coating is only as good as the surface under it. Diamond grinding opens the concrete for a true mechanical bond that consumer acid-etching simply cannot match.
What finishes can I choose from?
Solid color, flake (chip) systems, polyaspartic, and metallic. Flake is the most popular for garages because it hides dust, adds grip, and comes in endless color blends. Metallic creates a marbled, high-end look for showrooms and feature spaces.
Can you coat a cracked or stained slab?
In most cases, yes. Hairline and surface cracks are filled and stabilized during prep, and oil stains are treated before grinding. Larger structural cracks or active settling may need more substantial repair and an honest conversation about the result. The slab is evaluated at the free estimate and you are told exactly what prep it needs.
How long does an epoxy floor last?
It comes down to the prep and the topcoat. A correctly ground and coated floor far outlasts a kit that cut corners. Heavy commercial floors may need a refresh sooner depending on how hard they get used.
Do you serve outside Knoxville proper?
Yes. Calls from Farragut, Hardin Valley, Powell, Fountain City, and Maryville are routed alongside Knoxville itself, and larger commercial projects can go farther out. If you are near the edge of the service area with a real job, call (865) 284-2920 and we will let you know.
What is install day like, and how do I prepare?
Clear vehicles and as much off the floor as you can before the crew arrives. You will be told exactly what to move at the estimate. From there it is the crew's job: they grind the slab, repair cracks, check moisture, and lay the coating system you picked. Most garages are a one- or two-day job, and the crew leaves the space swept and walks it with you at the end.
Epoxy or polyaspartic, which is right for me?
Both are professional-grade and far tougher than retail floor paint. Epoxy flake systems are the popular choice for most garages and basements. Polyaspartic cures faster and handles UV and abrasion well, making it a strong option for commercial floors or tight schedules. See the full epoxy vs. polyaspartic comparison for the factor-by-factor breakdown, and the estimator will recommend the right system for your slab and how you use the space at the free estimate.
Do you charge for an estimate?
No. Estimates are free and carry no obligation. Call (865) 284-2920, tell us what you are working with, and the local crew comes out, looks at the slab, measures the space, and gives you a real number. You decide from there, and there is no charge either way.
How do I book an epoxy floor estimate in Knoxville?
One call does it. Ring (865) 284-2920, say whether it is a garage, a basement, or a commercial slab, and roughly how big the space is. That is enough to get the estimate moving. From there the local Knoxville crew handles the walkthrough, the number, and the scheduling directly with you.
What areas around Knoxville do you cover?
Knoxville proper plus Farragut, Hardin Valley, Powell, Fountain City, Maryville, Oak Ridge, and Lenoir City. If you are sitting right at the edge of that map with a real job, call anyway. Larger commercial floors travel farther than a single-bay garage does, so it is worth asking rather than assuming.
Do you coat commercial and warehouse floors too?
Yes. Warehouses, distribution floors, auto shops, commercial kitchens, retail and showroom spaces are all part of the work. A warehouse bay gets the same prep sequence a two-car garage does, only at a different scale and usually with a heavier-duty system spec.
How long does the epoxy installation take?
Most Knoxville garages and basements are a one- or two-day job. A standard two-car garage typically runs about a day and a half. Larger commercial slabs, or floors that need heavy grinding and crack repair, can run two to three days. You get the timeline at the free estimate so you know where to park in the meantime.
What warranty comes with a residential epoxy floor?
Warranty terms come from the local provider and the coating manufacturer, so ask for them in writing on the call or at the estimate. Failures caused by slab moisture or the substrate are commonly excluded. Any warranty is on the bond between the coating and the slab, which is exactly what proper diamond grinding is there to protect.
Does epoxy work in a basement, or just a garage?
Basements are absolutely on the list, but they start differently. A basement slab sits below grade in soil that holds moisture year-round, so every basement job begins with a moisture test on the concrete before a system is chosen. If the vapor drive is inside tolerance the install proceeds normally. If it is not, the fix is a mitigating primer or addressing the drainage first.
How do you clean and maintain an epoxy floor?
Dust mop or sweep for everyday grit, then damp mop with a pH-neutral cleaner when it needs it. Avoid abrasive pads and harsh acidic cleaners, which dull the topcoat over time. Wipe up oil, fuel, and brake fluid rather than letting them sit. That is the whole routine, and it is the main reason people move off bare concrete in the first place.
What time of year is best for epoxy in Tennessee?
Coatings go down year-round here, because the slab conditions matter more than the calendar. What the crew actually checks is slab temperature and how much moisture is coming up through the concrete, both of which swing with East Tennessee weather. If conditions are wrong on install day, the right call is adjusting the system or the schedule, not coating a floor that is not ready.
Do I need to do anything to the garage before install day?
Clear the floor. Vehicles, shelving, freezers, and tool chests all have to be off the slab so the grinder can reach every square foot. Wall-mounted storage can usually stay put. The crew tells you exactly what has to move at the free estimate, so nothing is a surprise on the morning of the install.

Ready to be done with bare concrete?

One call for a free estimate. No pressure, no obligation.

(865) 284-2920
Size up your job in 30 seconds
Tap to Call for a Free Estimate